[Tutorial][Fix] Permanently IMEI Fix for MTK Device [Updated SP tool method]

00:14 Alex 3 Comments

It is always advised that you take backup before experimenting with your android. 

Even God don't know what might happen to your device after flashing.

Here i am giving different methods to restore your IMEI.

METHOD NO:- 1 BY MOBILE UNCLE TOOLS

1. Select Engineer Mode
2. Select Engineer Mode MTK
3. Select CDS Information from the Connectivity tab
4. Select Radio Information
5. Select the SIM you wish to change the IMEI on
6. At the AT+ line for SIM 1, enter AT+EGMR=1,7,THE-FIRST-IMEI-NUMBER. For SIM 2, enter AT+EGMR=1,10,THE-SECOND-IMEI-NUMBER. Of course where the words are, you will enter a number.  
   
   
   

_________________________________________________________________________________

WATCH THIS  VIDEO TUTORIAL--->CLICK TO WATCH VIDEO

_________________________________________________________________________________

METHOD NO;- 2 BY MTK MOBILE UNCLE -2

1.download Mobileuncle MTK IMEI Write Tool Mobileuncle MTK IMEI Write Tool.zip
input"Y"，input IMEI code
finally，create IMEI .BAK,move it to ur phone or SD card 
2.download mobileuncle_MTK_toolv2.9.9.apk
3.need root， run mobileuncle MTK tool，choose IMEI backup and restore,restore IMEI.bak.

_____________________________________________________________________________________________

_____________________________________________________________________________________________

METHOD NO:-3 BY MTK DROID TOOLS

Needed Items

1. Root access on the phone
2. MTK Droid Tool: Download here
3. Your IMEI Number, usually written at the back of the phone when batteries are removed or at the pack of the phone
4. Android ADB drivers, depending on the phone you are using but there is a universal version: Download here

Procedures

1. Extract the MTK droid tools you downloaded. It would be extracted to the same folder the zipped file was except you change the location. On extraction, you would get a "MtkDroidTools" folder.

2. Open the folder and click on MTKdroidTools.exe to launch it

3. Install the ADB drivers if it has never been installed on the computer before. Connect the phone into the computer. On connecting, it would be identified with phone's information displayed. IMEI would be displayed too if its not having issues. But if an issue is present with the IMEI, it would be missing.

4. Now click on the ROOT button at the bottom right of the page. This button would be grayed out if the phone wasn't already rooted. So you really need to root your phone before you begin the process. Root access is needed for the tool to run scripts.

5. It will ask if you want to 'receive root shell through already established SU', just click 'Yes'.

Once that has been done, click on the 'IMEI/NVRAM' tab close to the IMEI part.

On clicking 'IMEI/NVRAM', the window below would appear. 

You would need to type in your IMEI number as seen from your phone case or inside the phone and then click on Replace IMEI.

6. You would be asked if you want to replace your IMEI, click Yes and then another window will tell you that 'changes will come into force after reset'. Click OK and then reboot your phone.

_____________________________________________________________________________________________

_____________________________________________________________________________________________

METHOD NO:-4 BY SP Flash TOOLS

1. In Case If You Still Don't get your IMEI back with above methods it means your Phone's sec_ro or ser_co has been replaced.[Don't bother asking what are these]
2. TO GET IT BACK FOLLOW THE STEPS
3. You Must have your stock SP Flashable ROM of your device or find it online 
4. Open SP Flash Tool Connect your device load the SP Flashable scatter file 
5. Uncheck all the options 
6. Only check the file sec_ro or ser_co 
7. Now Press download
8. After completion unplug your device and reboot.